PLANET ISW-1022M - Manual (Page 8)


6. Configure IP address
The ISW Managed Industrial Switch is shipped with default IP address as following.
IP Address : 192.168.0.100
Subnet Mask : 255.255.255.0
To check the current IP address or modify a new IP address for the Managed
Industrial Switch, please use the procedures as follow:
¢ Show the current IP address
1. On “Switch>” prompt, enter “enable” to enter Privileged EXEC mode.
2. On “Switch#” prompt, enter “show ip”.
3. The screen displays the current IP address, Subnet Mask and Gateway. As show
in Figure 6-1.
Figure 6-1 Show IP information screen
¢ Configure IP address
4. On “Switch#” prompt, type “configure” to enter the configuration Mode.