Epson AcuLaser C3000 - Manual (Page 294)

294 Working with Fonts
R4CE640
long.bk
Rev. E
A5 size APBAR.FM
6/10/04
L Proof Sign-off:
ABE J.Hashimoto, K.Iwamura
M.Ishigami
S. Halvorson
Notes on inputting and formatting bar codes
Please note the following when inputting and formatting bar code
characters:
❏ Do not apply shading or special character formatting, such as
bold, italic, or underline.
❏ Print bar codes in black and white only.
❏ When rotating characters, only specify rotation angles of 90°,
180°, and 270°.
❏ Turn off all automatic character and word spacing settings in
your application.
❏ Do not use features in your application that enlarge or reduce
the size of characters in only the vertical or horizontal
direction.
❏ Turn off your application’s auto-correct features for spelling,
grammar, spacing, etc.
❏ To more easily distinguish bar codes from other text in your
document, set your application to show text symbols, such as
paragraph marks, tabs, etc.
❏ Because special characters such as Start bar and Stop bar are
added when an EPSON BarCode Font is selected, the
resulting bar code may have more characters than were
originally input.
❏ For best results, use only the font sizes recommended in
“BarCode Font specifications” on page 295 for the EPSON
BarCode Font you are using. Bar codes in other sizes may not
be readable with all bar code readers.