ProSoft Technology MVI69E-LDM - Manual (Page 24)

Contents MVI69E-LDM ♦ "C" Programmable
Developer's Manual Linux Application Development Module
Page 24 of 130 ProSoft Technology, Inc.
August 21, 2014
1.6 Establishing Module Communications
Ensure that the module is firmly seated in the rack and that the cables connected to the
module are secure. Ensure that power is applied.
Note: If you require information on cables and port pinouts, please refer to the section entitled Cable
Connections (page 91) at the end of the manual.
RS-232 Console
If you are connected to Serial Port 1 (P1), establish communications with the module using
the following procedure.
Note: The following procedure uses PuTTY to establish communications. You can use a different
communication program.
1 Open PuTTY.
2 Set S PEED to 115200.
3 Set S ERIAL LINE to the appropriate COM port.
4 Ensure that C ONNECTION TYPE is set to Serial.
5 Click O PEN to open the PuTTY session.
6 Enter your login and password:
MVI69E login: root
Password: password