ProSoft Technology MVI56E-LDM - Manual (Page 13)

ControlLogix Platform ♦ "C" Programmable Preparing the MVI56E-LDM Module
Linux Application Development Module Developer's Manual
ProSoft Technology, Inc. Page 7 of 264
March 12, 2014
 Port 2
2.2 Package Contents - LDM
Your MVI56E-LDM package includes:

MVI56E-LDM Module
 ProSoft Technology Solutions DVD (includes all documentation, sample
code, and sample ladder logic).
 (1) Null Modem Cable (Cable 15)
 (2) Config/Debug Port to DB-9 adapter (Cable 14)
 (2) 1454-9F Connectors for RS422/RS485
 (1) Ethernet Cable (Cable 25)
Note: The Virtual Machine, toolchain, and other development files are not
shipped with the product. You may purchase the ProSoft Technology LDMdevKit
Part # LDMdevKit from your Rockwell Automation distributor.
If any of these components are missing, please contact ProSoft Technology
Support.
2.3 Recommended Compact Flash (CF) Cards
What Compact Flash card does ProSoft recommend using?
Some ProSoft products contain a "Personality Module", or Compact Flash card.
ProSoft recommends using an industrial grade Compact Flash card for best
performance and durability. The following cards have been tested with ProSoft’s
modules, and are the only cards recommended for use. These cards can be
ordered through ProSoft, or can be purchased by the customer.
Approved ST-Micro cards:

32M = SMC032AFC6E
 64M = SMC064AFF6E -
 128M = SMC128AFF6E
Approved Silicon Systems cards:

256M = SSD-C25MI-3012
 512M = SSD-C51MI-3012
 2G = SSD-C02GI-3012
 4G = SSD-C04GI-3012
ProSoft provides the 64M = SMC064AFF6E Compact Flash Card. The
endurance spec for this card is 2 million write/erase cycles.
WARNING: Do not shutdown or power cycle the module in any way during a
NAND write to the CF.
2.4 Jumper Locations and Settings
Each module has three jumpers:

Setup