ProSoft Technology MVI71-MCM User Manual
Page 80
Advertising
MVI71-MCM ♦ PLC Platform
Reference
Modbus Communication Module
Page 80 of 111
ProSoft Technology, Inc.
December 28, 2007
2
Make sure that you are not actively browsing using the driver that you wish to
stop. The following shows an actively browsed network:
3
Notice how the DF1 driver is opened, and the driver is looking for a processor
on node 1. If the network is being browsed, then you will not be able to stop
this driver. To stop the driver your RSWho screen should look like this:
Branches are displayed or hidden by clicking on the or the icons.
4
When you have verified that the driver is not being browsed, go to
Communications>Configure Drivers
You may see something like this:
Advertising