Ericsson Multi-Format Receiver RX1290 - Manual (Page 161)

Menus
Table C.20 High Speed Data Over Ethernet Menu
Display Title: Ethernet Data Description
User PID XXXX
YYY PIPE ZZZZ XXXX is the currently selected HSD PID
YYY is the stream status (PRESENT, NOT PRESENT)
ZZZZ is the status of the service (OK, STOP, FAILED)
Bit-rate X.XX
YYY ZZZZ XXXXX is the data bit-rate
YYY is editable control (ENABLED, DISABLED)
ZZZZ is the output status (OK, STOP, FAIL)
Packet Lost
Frame Lost XXXXX is the number of Packets lost
YYYY is the number of framed Lost
Forward to Gateway XXX
Gateway YYY.YYY.YYY.YYY XXX is the editable Gateway option (ON, OFF)
When XXX is set to ON, the destination Gateway can be set.
C.7.9 VBI Menu
The VBI status submenu displays the current status of the VBI components.
Note: The VITC menu functionality is not supported in software version 1.0.0.
Table C.21 VBI Menu
Display Title: VBI Description
Closed Captions XXXXXXXXXXX
YYYYYYY ZZZZ XXXXXXXXXXX indicates the presence of Closed Captions
(PRESENT, NOT PRESENT)
YYYYYYY is the editable parameter for enabling Closed
Captions pass-through (ENABLED, DISABLED)
ZZZZ indicates the status of the output (OK, STOP, FAIL)
C.7.10 PCR PID Menu
The PCR PID submenu displays the Program Clock Reference packet identifier and
its status.
Table C.22 PCR PID Menu
Display Title: PCR PID Description
PCR PID XXXX
YYYYYYYYYY XXXX is the PCR PID
YYYYYYYYYY is (PRESENT, NOT PRESENT)
C.7.11 Network ID Menu
The Network ID submenu displays the network ID and the Original Network ID from
the current Service Description Tables.
EN/LZT 790 0003/2 R1A C-19