Brother ADS-2400N - Manual (Page 5)

5
Product Safety Guide
To use the unit safely
WARNING
ELECTRICAL HAZARDS
Failure to follow the warnings in this section may create the risk of an electrical shock.
In addition, you could create an electrical short, which may create the risk of a fire.
There are high-voltage electrodes inside the unit. Before you access the inside of the
machine, including for routine maintenance such as cleaning, make sure you have
unplugged the power cord from the AC power outlet, and that you have unplugged any
Ethernet (ADS-2800W, ADS-3600W only) cables from the machine.
DO NOT push objects of any kind into the unit through slots or openings in the casing,
as they may touch dangerous voltage points or short out parts.
DO NOT continue using the unit if it has been dropped or the cabinet has been
damaged. Instead, unplug the unit from the power outlet and contact Brother
Authorized Service Personnel.
The unit should be connected to an AC power source within the range indicated on
Specifications in the User’s Guide. DO NOT connect it to a DC power source or
inverter. Doing this might cause an electrical shock or fire. If you are not sure what
kind of power source you have, contact a qualified electrician.
If water, other liquids, or metal objects get inside the unit, immediately unplug the unit
from the AC power outlet and contact Brother Authorized Service Personnel.
Power Cord Safety:
• Use only the power cord supplied with this product.
• DO NOT allow anything to rest on the power cord.
• DO NOT place the unit where people can walk on the cord.
• DO NOT place the unit in a position where the cord is stretched or strain is
otherwise put on the cord, as the cord may become worn or frayed.
• DO NOT use the unit or handle the cord if the cord has become worn or frayed.
If unplugging the unit, DO NOT touch the damaged/frayed part.
• Brother strongly recommends that you DO NOT use any type of extension cord.