EAW MQV1366e User Manual

Specifications mqv1366e

Advertising
background image

SPECIFICATIONS MQV1366e

FEATURES

PHYSICAL

One Main Street, Whitinsville, MA 01588

508 234 6158

Toll Free 800 992 5013

FAX 508 234 8251

[email protected] www.eaw.com

EAW products are continually improved. All specifications are therefore subject to change without notice.

MQV1366e/0002690/002/2 pp October 2003

Printed in USA

FEATURES

DESCRIPTION

PERFORMANCE

APPLICATION

• Full-range, 3-way system
• 15-in LF; 10-in horn-loaded MF; 2-in exit Neodymium HF
• 60° x 60° beamwidth
• Horizontally configured to create vertical arrays

A 3-way, full-range system in a vented trapezoidal enclosure.
Includes a slot-loaded 15-in woofer, a horn-loaded 10-in MF
cone with Radial Phase Plug™, and a 2-in exit/3-in diaphragm
Neodymium compression driver. The MF and HF horns provide
a nominal 60° x 60° beamwidth. An internal passive crossover
with jumpers on the input panel allows user selection of
either bi-amplified or passive operation. In either case digi-
tal signal processing is required to achieve specified perform-
ance. The enclosure features a comprehensive system of 3/8”-
16 threaded suspension points.

The MQV1366e combines the MQ Series LF/MF/HF components
into a full-range, single-enclosure loudspeaker. It is horizon-
tally configured for arraying in vertical columns. This arrange-
ment is typically used in sports arenas and other venues where
the array must address wide, vertical audience angles. The
MF/HF horns in the MQV1366e feature a rigid but well-damped
construction using wood veneer backed by structural foam. A
no-compromise design means the mid and high frequency
horns are truly large enough to provide optimal pattern con-
trol throughout each passband.

Application Usage: Install

Houses of Worship

Auditoriums

Theatres

Arenas

Performing Arts Centers

Stadiums

Calculated Maximum Output (dB SPL @ 1m)

LF Peak/Long Term 128/122

MF/HF Peak/Long Term 140/134

MF Peak/Long Term 141/135

HF Peak/Long Term 134/128

Nominal Coverage Angle, -6 dB Points (degrees)

Horizontal 60

Vertical 60

Recommended High-Pass Frequency

24 dB/Octave 50 Hz

Frequency Response

±3 dB 70 Hz to 15 kHz

-10 dB 50 Hz

Axial Sensitivity (dB SPL, 1 Watt @ 1m)

LF 95

MF/HF 108

MF 109

HF 106

Impedance (Ohms)

LF 8

MF/HF 8

MF 8

HF 8

Power Handling, AES Standard (Watts)

LF 550

MF/HF 400

MF 400

HF 150

LF Subsystem 1x 15-in woofer

MF Subsystem 1x 10-in horn loaded cone

HF Subsystem 2-in exit/3-in diaphragm com-

pression driver on constant
directivity horn

Configuration Three-way, full range

Powering Bi- or Tri-amplified

Enclosure Materials Exterior grade Baltic birch plywood

Finish Wear-resistant textured black paint

Connectors Terminal barrier strip

Suspension Hardware 16x 3/8”-16 threaded mounting

points (4 each on top, bottom
and sides

Grille Powder coated perforated steel

Dimensions

inches

millimeters

Height (front) 26.65

677

Height (rear) 15.3

389

Width 56.25

1429

Depth 25.59

650

Trapezoid Angle 12.5 Degrees per Side

Weights

pounds

kilograms

Net Weight 215

97.7

Shipping Weight 240

109.1

Advertising