Connection – BenQ TH683 User Manual
Page 18
Connection
18
Connection
When connecting a signal source to the projector, be sure to:
1.
Turn all equipment off before making any connections.
2.
Use the correct signal cables for each source.
3.
Ensure the cables are firmly inserted.
•
In the connections shown below, some cables may not be included with the projector (see
). They are commercially available from electronics stores.
•
The connection illustrations below are for reference only. The rear connecting jacks
available on the projector vary with each projector model.
*For updating the firmware.
1.
USB cable*
2.
VGA cable
3.
HDMI cable
4.
Component Video to VGA (D-Sub)
adapter cable
5.
Video cable
6.
Audio L/R cable
7.
Audio cable
8.
HDMI-Micro USB cable
6
5
7
1
3
4
3
8
3
2
7
Notebook or desktop
computer
A/V device
Speakers
Smartphone or
tablet PC