Features for star models only, Star radio protocol timeout, Default – Datalogic QuickScan I QD2400 User Manual
Page 244
Enter/Exit Programming Mode
Other BT Features
234
QuickScan™ I QD24XX/QBT24XX/QM24XX
FEATURES FOR STAR MODELS ONLY
The features in this section are valid only for the QuickScan I GM440X Star model:
•
STAR Radio Protocol Timeout on page 234
•
STAR Radio Transmit Mode on page 235
STAR Radio Protocol Timeout
This parameter sets the valid wait time before transmission between the handheld reader and
Base Station is considered failed.
When setting this parameter, take into consideration the radio traffic (number of readers in the
same area). The selectable range for this feature is from 02 to 25 seconds. See
in
“References” for detailed information and examples for setting this feature.
Set Radio Protocol Timeout
Make a mistake? Scan the CANCEL barcode to abort and
not save the entry string. You can then start again at the
beginning.
~
CANCEL
DEFAULT
02 = 2 Seconds Radio Protocol Timeout