Midi settings, Pre-programmed midi templates – Yamaha CVP-705B User Manual
Page 90
CVP-709/CVP-705 Reference Manual
90
MIDI Settings
In this section, you can make MIDI-related settings for the instrument. This instrument gives you a set of ten pre-
programmed templates that let you instantly and easily reconfigure the instrument to match your particular MIDI
application or external device. Also, you can edit the pre-programmed templates and save up to ten of your original
templates.
NOTE
No MIDI signals are received in the Piano Room.
1
Touch the box (shown above), then select a pre-programmed MIDI template (below).
If you have already created an original MIDI template and saved it to User memory (in steps 2 and 3 below), you can
also select that template from User memory.
2
If desired, edit the MIDI parameters based on the MIDI template selected in step 1 in the
relevant setting display.
•
System:
Lets you set the MIDI System related parameters.........................................................................
•
Transmit:
Lets you set the MIDI Transmission related parameters. ........................................................
•
Receive:
Lets you set the MIDI Reception related parameters. .................................................................
•
On Bass Note:
Lets you select the MIDI channels of which the MIDI data coming from the external MIDI
device will be used for detecting the bass note for Style playback. .............................................................
•
Chord Detect:
Lets you select the MIDI channels of which the MIDI data coming from the external MIDI
device will be used for detecting the chord type for Style playback............................................................
3
When you’ve finished editing in each display, touch
(Save) to save the MIDI settings as
your original MIDI Template.
NOTE
Your original MIDI templates can be saved as a single file to a USB flash drive. On the display called up via [Menu]
[Utility] [Factory Reset/Backup] page 2/2, touch [Backup] of “MIDI” to execute the Save operation (
).
Pre-programmed MIDI Templates
All Parts
Transmits all parts including the keyboard parts (Main, Layer and Left), with the
exception of Song parts.
KBD & STYLE
Basically the same as “All Parts” with the exception of how keyboard parts are managed.
The right-hand parts are handled as “Upper” instead of Main and Layer, and the left-hand
part is handled as “Lower.”
1
3