Echo PB-620 - Manual (Page 3)

3
12. Remove plastic cable tie (P) from flex pipe.
13. Remove old handle assembly from unit.
Install Cruise Control Handle Assembly
1. Assemble new Cruise Control Handle Assembly (Q) to handle clamp
using handle adjustment knob and nut.
2. Place throttle cable tube over top of flex pipe and between engine and
backpack frame.
3. Connect throttle cable end (J) to carburetor throttle plate (K).
4. Place carburetor gasket between carburetor and insulator block on
engine, and assemble air filter case with carburetor (I) to engine. Make
sure spark plug lead is positioned between fan housing and air filter
case, and tighten carburetor mounting screws securely.
5. Connect ignition ground lead (M) to engine with screw and tighten
securely.
6. Connect ignition lead connectors in insulated coupler (L).
Q
R
S
J
K
I
C
RUISE
C
ONTROL
K
IT
I
NSTALLATION
I
NSTRUCTIONS
I
P
L
M