Charging the battery, Charging the battery 3 – Huawei MediaPad T1 8.0 User Manual
Page 6
3
1.
Open the SIM and microSD card slot cover.
2.
Insert the SIM card with its gold contacts facing up, as indicated in the preceding figure.
Push the card inward until it clicks into place.
3.
Insert the microSD card with its gold contacts facing up, as indicated in the preceding
figure. Push the card inward until it clicks into place.
4.
Replace the card slot cover.
To remove the microSD card when your HUAWEI MediaPad is powered on, on the home
screen, touch
Settings > Storage > Unmount SD card. When the microSD card is
uninstalled, remove the back cover and gently remove the card.
Charging the Battery
When the battery level becomes low, charge your HUAWEI MediaPad in a timely manner;
otherwise it automatically powers off when the battery power is depleted.
If you are charging the battery for the first time, charge it for at least 12 hours to ensure that
your HUAWEI MediaPad can correctly display the battery level.
1.
Use the USB cable that comes with your HUAWEI MediaPad to connect the charger to
your device.
2.
Connect the charger plug to a power outlet.
Your HUAWEI MediaPad uses a built-in battery that is not removable. To replace the
battery, contact an authorized service center. Do not attempt to remove it yourself.