Electrolux 130 FG-m - Manual (Page 19)

19
Mounting of attachment fitting
on the sides of the combi-grill
If the appliance is mounted in a 270 X
490 mm cutout, or if for other reasons
there is no room for the side
attachments, these should be removed
before the appliance is set into the
worktop.
Set the appliance into the worktop and
then raise it enough to expose the
screws in the sides.
Remove the screws.
Mount the attachment fittings so that
they interlock with the frame (See
illustration).
Reinsert the screws in the sides
through the oblong hole in the fitting.
Set the appliance into the worktop and
tighten the attachment fittings.