Eclipse - Fujitsu Ten AVN6600 - Manual (Page 127)

127
O
p
ti
onal
fu
nc
tio
n
• The actual position and distance of people or objects may vary depending on
the features of the camera lens.
• Do not expose the camera to strong shocks such as hitting it or knocking it onto
other objects. The Rear View Camera may not function properly if the position of
the camera or its mounting angle is incorrect.
• The camera is waterproof. Do not uninstall, dismantle or reconfigure the unit.
Otherwise, the Rear View Camera may not function properly.
• If strongly rubbing the camera cover or using a hard brush or abrasive to clean
it, the camera may get scratched adversely affecting the image quality.
• The camera cover is made of plastic. Do not apply an organic solvent, body
wax, oil remover, glass coating, etc. If having applied any of the above, wipe it
off immediately.
• Pouring hot water on the Rear View Camera to deice it in cold weather can lead
to a drastic change in temperature that may render normal operation impossible.
• The Rear View Camera may not operate normally if the camera is damaged as a
result of having hit the unit. Immediately bring it to the store of purchase for an
inspection.
• Do not leave it in direct sunlight for long periods of time. Otherwise, a printed
image phenomenon may result.
• The figure is merely an example. The range appearing on the monitor screen
varies depending on the vehicle model.
• The instant the vehicle is put in reverse, part of the monitor will appear white then
gradually stabilize.
• A white vertical band will appear when struck by light from the sun, headlights or
any other strong light beam source (Smear effect).
• After having used the unit for a long time, white scratches and vertical lines may
appear due to a rise in temperature depending on the features of the CCD.
• The 50 Hz power source range fluorescent light may cause flickering in the
screen. This is not a malfunction.
• Because the Rear View Camera uses a special lens, the image and distance
appearing on the screen differs from the actual image and distance.