Eiki PJNET-300 - Manual (Page 63)

63
OWNER'S MANUAL
ENGLISH
*2 The reserved port numbers are http (80), ftp (21), SNMP (25), POP3 (110) etc. The port num-
ber 10000 is reserved to control the projector through the LAN port.
✐ Exclusive driver software for control of the external equipment is required. This product does
not provide any driver software. Please consult your local dealer.
✐ There are 2 types of RS-232C serial cable, Normal(Straight) and Reverse(Cross) type. Usually,
when connecting between this product and a projector or a computer, use Reverse type of
serial cable. When connecting DVD player etc., use Normal type.
Setting for controlling the equipment connected to the
serial port from the computer.
Serial Control :Selects "External"
Port number : Sets according to the computer specified port
no. Do not use port number 10000* 2 .
Other Settings : Sets according to the communication condition
of the equipment
Setting for controlling the projector from the serial con-
troller connected to the serial port.
Serial Control :Selects "Projector"
Port number : Not specified. Do not use port number 10000* 2 .
Other Settings : Sets according to the communication condition
of the serial controller
Setting for controlling the projector from the computer
through the LAN port.
Serial Control :Not specified
Port number :Not specified
Other Settings :Not specified
* The port number of the computer must be used with 10000.
Setting examples for the serial control
Serial port setting