Sharp PN-60TA3 User Manual
Turn on the power
Power button/Power LED
(1) Turn on the main power
Set a AAA battery in the touch pen and the AA
battery in the Remote Control Unit.
Connect the touch pen adapter
Prepare the touch pen and the Remote
Insert the touch pen adapter into the touch
pen adapter port on the backside of the
(２) Push the power button.
Set the operation mode
Easy Setup Guide for PN-70TA3/PN-60TA3
Status of the monitor
Power off(Standby mode)
(Whiteboard standby mode)
Input signal waiting mode
Set the date/time of the monitor
Set the date and time by the remote control
Set the operation mode by the remote control
Enable the system mode
(1) Touch a toolbar
in the launcher.
(３) Enter password.
(２) Touch “Settings”
in the launcher menu.
Enter the password set in admin password.
If a password is not set , enter “00000”