Filter type change 1, Filter force reset 1 – Philips AC3256/30 User Manual
Page 18
18
EN
4
Touch and hold
for 3 seconds to
force reset the filter lifetime of the
NanoProtect S3 AC filter and exit
the filter force reset mode.
3s
Filter type change
1
Touch
and
simultaneously
for 3 seconds to enter the filter type
change mode.
» Code (A3) of the NanoProtect
S3 filter HEPA displays on the
screen.
3s
2
Touch
to select the filter code of
the new filter you will use.
Filter force reset
1
Touch
and
simultaneously
for 3 seconds to enter the filter force
reset mode.
» Code (A3) of the NanoProtect
S3 filter HEPA displays on the
screen.
3s
2
Touch and hold
for 3 seconds to
force reset the filter lifetime of the
NanoProtect S3 filter HEPA.
3s
3
Code
(C7) of the Nanoprotect AC
filter displays on the screen after the
lifetime of the NanoProtect S3 filter
HEPA has been reset.