Philips GC7057/20 - Manual (Page 8)

Problem Possible cause Solution
Steam continues to
come out after I
release the steam
trigger.
Steam is generated in the
soleplate. When you release
the steam trigger, remaining
water is transformed into
steam. This is normal.
Release the steam trigger 2 to 3 seconds
before you place the iron back on the iron
platform or ironing board.
There is a strong
gush of steam
when I release the
steam trigger after
placing the iron on
the iron platform.
When the iron is tilted
upwards, remaining water is
collected and converted into
strong steam. This is normal.
Release the steam trigger 2 to 3 seconds
before you place the iron back on the iron
platform or ironing board.
Steam is weak. You do not press the steam
trigger continuously.
Keep the steam trigger pressed
continuously when you move the iron over
the fabric.
You use the ECO mode. For more steam, switch off the ECO mode
by pressing the ECO button. The green
ECO light goes off.
Steam does not
come out
immediately when I
press the steam
trigger.
Water is converted into
steam in the soleplate. When
you press the steam trigger, it
will take 1 to 2 seconds until
steam is generated and
released. This is normal.
Keep the steam trigger pressed
continuously when you move the iron over
the fabric.
ENGLISH 10