Iiyama xub2792hsu - Manual (Page 13)

ENGLISH
8 BEFORE YOU OPERATE THE MONITOR
FITTING AND REMOVAL OF BASE : ProLite XU2792HSU
CAUTION  Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
 Do not give a strong impact to the monitor. It may cause damage.
 Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
<Removal>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor flat on a table with front face down.
Loosen the 'thumb screw' to remove the Stand-Base
from the stand-neck.
Loosen the screw to remove the stand-neck from the
monitor.
Pull the hook of the Cable Holder outside and remove
it.
<Installation>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor flat on a table with front face down.
Hold the monitor and install the stand-neck. Secure it
using the screw provided.
Install the stand-base to the stand-neck.
Use the ‘thumb screw’ provided to secure the base to
the stand-neck.
Place the Cable Holder.
Stand-Base
Stand-Neck
Cable Holder
Screw
Cable Holder
Screw
Thumb screw
for Stand-Base fixing
Thumb screw
for Stand-Base fixing