Roborock Auto Empty Dock Pure CE - Manual (Page 6)

06
Safety Information
• Do not charge non-rechargeable batteries.
• In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external
switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
• Be sure that the supply voltage meets the requirements listed on the dock.
• Only use the power cable provided with the product to prevent potential smoke, heat or fire.
• Do not use the product with any type of power adapter, as this may cause danger and void the warranty.
• Do not dismantle, repair or modify the battery or charging dock.
• Do not wipe the charging contacts with wet cloth or wet hands.
• If the power cord is damaged, stop using it immediately. It must be replaced by the manufacturer, its service agent, or similarly qualified
persons to avoid a hazard.
• If the dock is placed in an area susceptible to thunderstorms or with unstable voltage, take protection measures.
• Use of the original packaging for transportation is advised.
• Unplug the power cable before placing the dock into storage.
Battery and Charging
WARNING