Roborock Dyad Pro FCC - Manual (Page 5)

06
Safety Information
Battery and Charging
• Please keep the power supply and docking station away from heat (such as heating plates).
• For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet, if needed.
• The battery must be removed from the appliance before it is scrapped.
• The appliance must be disconnected from the supply mains when removing the battery.
• The battery is to be disposed of safely. Please do not discard waste batteries. Leave them to a professional recycling organization.
• Do not wipe or clean the power supply or docking station shrapnel with a piece of wet cloth or wet hands.
• Please make sure the cleaner is powered off in shipment and original packaging is advised.
• If left unused for a long period, please store the cleaner in a cool and dry place afer having it fully charged and switched off, charge it at
least every three months to avoid the battery being over discharged.
• Please do not use the product when the temperature is higher than 40°C (104°F) or lower than 4°C (39°F) , or there is any liquid or sticky
substance on the floor.
Battery pack charging temperature
Battery pack using temperature
Battery pack storage temperature
Storage(within 3 months)
Long Storage(3months)
4°C ~ 40°C (39 ~ 104°F)
4°C ~ 40°C (39 ~ 104°F)
-20°C ~ 45°C (-4 ~ 113 °F)@Less than 75% RH
25+/- 3°C (77 °F +/- 37.4 °F)@Less than 75% RH
International Symbols Explanation
– ON-OFF (push-push) symbol [symbol IEC 60417-5010 (2009-02)]
– ALTERNATING CURRENT symbol [symbol IEC 60417-5032 (2009-02)]
– DIRECT CURRENT symbol [symbol IEC 60417-5031 (2009-02)]