Xiaomi Redmi Pad - Manual (Page 7)

limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, ICNIRP
Guidelines, and UK Radio Equipment Regulations 2017 (SI 2017/1206).
During SAR testing, this device was set to transmit at its highest certified
power level in all tested frequency bands.
When attaching the device near the body, a belt clip or holster should be used
which does not contain metallic components. RF exposure compliance was
not tested or certified with any accessory containing metal worn on the body,
and use of such an accessory should be avoided.
Certification Information (Highest SAR)
SAR 10 g limit: 2.0 W/Kg,
SAR Value: Body: 0.356 W/Kg (0 mm distance).
Legal Information
Observe national and local regulations where the device is used.
This device is restricted to indoor use only when operating in the 5150 to 5350
MHz frequency range in:
UK
This device is restricted to indoor use only when operating in the 5150 to
5350MHz in Hong Kong.
Ensure the power adapter used meets the requirements of Clause 6.4.5 in
IEC/EN 62368-1 and has been tested and approved according to national or
local standards.
Frequency Bands and Power
This tablet offers the following frequency bands in EU areas only and
maximum radio-frequency power:
Bluetooth: 20 dBm
Wi-Fi 2.4 GHz band: 20 dBm
Wi-Fi 5 GHz: 5150 to 5250MHz: 23 dBm, 5250 to 5350 MHz: 20 dBm, 5470 to
5725 MHz: 20 dBm, 5725 to 5850 MHz: 14 dBm
E-label
This device has an electronic label for certification information.
To access it, please go to Settings > About tablet > Certification, or open
Settings and type “Certification” into the search bar
Model: 22081283G
2208 indicates that this product will be launched after 202208.