Xiaomi Mi Sphere Camera Kit - Manual (Page 4)

This version is for private use only and should not be distributed.
03
Instructions
1. Turning on/off
Turning on: Press the Power/Mode button. Photo and video status indicators will light up,
and the indicator of the current mode will remain steady. Turning off: Press and hold the
Power/Mode button until the status indicator of the current mode is off.
2. Switching between photo and video mode
Press the Power/Mode button to switch between photo and video modes. Video mode is
set as factory default.
3. Recording videos
Video status indicator is steady blue in video mode.
Press the Shutter/OK button to start recording.
Video status indicator will turn red and start blinking.
Press the Shutter/OK button to stop recording.
Video status indicator will flash 3 times and turn steady blue again.
4. Short videos
While in video mode, long press the Shutter/OK button to record a short video. Video
status indicator will turn red and start blinking. Your camera will stop recording automati-
cally in 10 seconds. The length of short videos can be set in the App.
5. Taking photos
Photo status indicator is steady blue in the photo mode. Press the Shutter/OK button to
take a photo. Photo status indicator will flash once with every photo you take.
6. Resetting Wi-Fi password
Press and hold the Wi-Fi button for 5 seconds to reset Wi-Fi password.
7. Battery indicator
a. Charger isn't connected
Low battery: Battery indicator is flashing red.
Out of power: Battery indicator is off.
b. Charger is connected
Charging: Battery indicator is steady red.
Fully charged: Battery indicator turns steady blue.