Samsung M50C 32" HDR Smart Monitor (Black) - Manual (Page 27)

- 27 -
Tidying Up the Connected Cables
S27CM50*
S32CM50*
1 1 1 2 3
S27CM70*
S32CM70*
1 1 1 2 1 3
1. Connect the corresponding cables.
2. Pull the right side of the HOLDER-STAND CABLE to remove from the stand.
The left side of the cable can be damaged when pulled forcibly.
3. Put both cables in the cable holder on the stand (HOLDER-STAND CABLE) to organize the cables, as shown in the figure.
Assembly is complete.
S27CM80*
S32CM80*
1 1 2 1 3
S27C90*
1 2 3
1. Pass cables through the hole on the stand.
2. Connect the cables to the corresponding ports.
3. Organize cables by passing them through the hole on the stand, as shown in the figures.