Roland RD-88 Digital Stage Piano - Manual (Page 27)

27
Other Functions
If no sound packs or wave expansions are imported
or installed
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
8. To execute, use the cursor [>] buttons to select “OK,”
and then press the [ENTER] button.
9. When the screen indicates “Completed.” turn the
RD-88’s power off and on again.
Formatting a USB Flash Drive (FORMAT USB
MEMORY)
NOTE
5 If the USB flash drive contains important data, be aware that this
operation erases all data from the drive.
5 Never turn off the power or remove the USB flash drives while the
screen indicates “Executing....”
1. Press the [MENU] button.
2. Use the cursor [ ] [ ] buttons to select “UTILITY,”
and then press the [ENTER] button.
3. Use the cursor [ ] [ ] buttons to select “FORMAT
USB MEMORY,” and then press the [ENTER] button.
A confirmation message appears.
If you decide to cancel, press the [EXIT] button.
4. To execute, use the cursor [<] [>] buttons to select
“OK,” and then press the [ENTER] button.
When formatting is complete, the screen indicates “Completed!”
The folder structure of a USB flash drive
ROLAND
RD-88
BACKUP
SONG LIST
To play songs from a USB flash drive,
place them in the SONG LIST folder.
The backed-up data is saved in the
BACKUP folder.
SOUND
To import tones , place them in the
SOUND folder.
Editing the System Settings (SYSTEM)
Here’s how to edit system parameters.
1. Press the [MENU] button.
2. Use the cursor [ ] [ ] buttons to select “SYSTEM,”
and then press the [ENTER] button.
3. Use the cursor [ ] [ ] buttons to select the item that
you want to edit, and press the [ENTER] button.
4. Use the cursor [ ] [ ] buttons to select the
parameter that you want to edit, and use the [DEC]
[INC] buttons to edit the value.
For details, refer to “Parameter Guide” (PDF).
Saving the System Settings (System Write)
5. To save the changes, press the [WRITE] button.
MEMO
If you edit the system settings, an “*” symbol appears beside
“SYSTEM.”
6. Use the cursor [ ] [ ] buttons to select “SYSTEM”
and then press the [ENTER] button.
The SYSTEM WRITE confirmation screen appears.
7. To execute, use the cursor [>] buttons to select
“WRITE,” and then press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
Viewing the Program Version
(INFORMATION)
Here’s how to view the version of the RD-88’s system program.
1. Press the [MENU] button.
2. Use the cursor [ ] [ ] buttons to select
“INFORMATION,” and then press the [ENTER]
button.