Extron electronic MVX 128 - Manual

1-2
Extron MVX 128 Plus Series Matrix Switchers • Specifications
Specifications — MVX 128 Plus Series
Video
Routing .......................................... 12 x 8 matrix
Gain ............................................... Unity
Bandwidth .................................... >300 MHz (-3 dB), fully loaded
0 - 10 MHz ................. no more than +0.1 dB to -0.1 dB
0 - 130 MHz ............... no more than +0.8 dB to -0.8 dB
Crosstalk ....................................... -80 dB @ 1 MHz, -55 dB @ 10 MHz, -45 dB @ 30 MHz, -37 dB @ 100 MHz
Switching speed ........................... 200 ns (max.)
Video input
Number/signal type ................... 12 RGBHV, RGBS, RGsB, RsGsBs, HDTV component video, component video,
S-video, composite video
Connectors .................................... 12 female 15-pin HD
Nominal level ............................... 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels ...... Analog: 0.5 V to 2.0 Vp-p with no offset
Impedance .................................... 75 ohms
Return loss .................................... <-30 dB @ 5 MHz
DC offset (max. allowable) ......... 1.5 V
Video output
Number/signal type ................... 8 RGBHV, RGBS, RGsB, HDTV component video, component video, S-video,
composite video (follows input type)
Connectors .................................... 8 female 15-pin HD
Nominal level ............................... 1 Vp-p for Y of component video and S-video, and for composite video
0.7 Vp-p for RGB and for R-Y and B-Y of component video
0.3 Vp-p for C of S-video
Minimum/maximum levels ...... 0 V to 2.0 Vp-p (follows input)
Impedance .................................... 75 ohms
Return loss .................................... -30 dB @ 5 MHz
DC offset ....................................... ±5 mV with input at 0 offset
Switching type ............................. Triple-Action
™
Sync
Input type ..................................... RGBHV, RGBS, RGsB, RsGsBs
Output type .................................. RGBHV, RGBS, RGsB, RsGsBs (follows input)
Tri-level on Y, R-Y, B-Y channels (component video 720p, 1080i, 1080p)
Bi-level on Y channel (for all other component video rates)
Input level ..................................... 0.5 V to 5.0 Vp-p, 4.0 Vp-p normal
Output level.................................. AGC to TTL: 4.0 V to 5.0 Vp-p, unterminated
Input impedance .......................... 510 ohms
Output impedance ...................... 75 ohms
Max input voltage ....................... 5.0 Vp-p
Max. propagation delay .............. 30 ns
Max. rise/fall time ....................... 4 ns
Polarity .......................................... Positive or negative (follows input)
Audio
Routing .......................................... 12 x 8 stereo matrix
Gain ............................................... Unbalanced output: -6 dB; balanced output 0 dB
Frequency response ..................... 20 Hz to 20 kHz, ±0.05 dB
THD + Noise ................................ 0.03% @ 1 kHz at nominal level