Roland V-8HD HDMI Video Switcher and UVC-01 USB Capture Device Kit - Manual (Page 47)

47
Other Features
Editing a macro
You can edit the contents of a function, change the order in which it
is executed, or copy/delete a function either while creating a macro
or after the macro is finished.
1 . In step 3 of “Renaming a Macro” (p. 50), select the
function you want to edit in the list, and press the
[VALUE] knob.
The FUNCTION EDIT menu appears.
2 . Edit, move, copy or delete the function.
Editing the contents of a function
1 Follow steps 4–9 in “Recording a Macro” (p. 46) to edit the
contents of the function.
Moving a function
1 Use the [VALUE] knob to select “MOVE THIS FUNCTION”, and
press the [VALUE] knob.
MOVE FUNCTION screen appears.
2 Use the [VALUE] knob to select where you want to move the
function, and then press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
3 Use the [VALUE] knob to select “YES”, and press the [VALUE] knob.
The function is moved, and the message “COMPLETE” appears.
Copying a function
* Copying is disabled if the number of recorded functions have
reached the limit (10).
1 Use the [VALUE] knob to select “COPY THIS FUNCTION”, and
press the [VALUE] knob.
The COPY FUNCTION screen appears.
2 Use the [VALUE] knob to select where you want to copy the
function to, and then press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
3 Use the [VALUE] knob to select “YES”, and press the [VALUE]
knob.
The function is copied, and the message “COMPLETE” appears.
Deleting a function
1 Use the [VALUE] knob to select “DELETE THIS FUNCTION”, and
press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
2 Use the [VALUE] knob to select “YES”, and press the [VALUE] knob.
The function is deleted, and the message “COMPLETE” appears.
3 . Press the [MENU] button to close the menu.