Roland AIRA Compact T-8 Beat Machine - Manual (Page 16)

Using the Bass Sequencer
16
Checking and editing what’s in a step (step mode)
1. Press one of the step buttons (and keep holding the step button until you’re finished editing).
The step’s note is displayed.
2. Use the [TEMPO/VALUE] knob while holding down the step button to edit the note’s value (
n.oFF
,
n.C0
–
n.C7
,
n.tie
).
3. Press the [ACCENT] button while holding down the step button.
The accent setting (
A.OFF
,
A.On
) is displayed.
4. Press the [ACCENT] button again.
Displays the slide setting ( S.OFF , S.On ).
With each press of the [ACCENT] button, the setting value cycles as follows: note Ó accent Ó slide.
5. While holding down the step button, use the [TEMPO/VALUE] knob to edit the accent or slide setting.
Using the step buttons as a keyboard (keyboard mode)
1. Press the [KYBD] button.
Keyboard mode is activated for the step buttons.
If a rhythm instrument is selected, the unit switches to bass.