Samson S-MAX MD1 Pro Single Channel Passive Direct Box - Manual (Page 4)

1 2 3 4 5
Callouts
1. INPUT – 1/4” hi-Z input jack for connecting for instrument, line level, or speaker level audio signals.
2. THRU – 1/4” output for passing the input signal through to a stage amplifier or monitor system.
3. -15dB / -30dB Pad switch – When engaged, the input level is attenuated by either -15dB or -30dB to
prevent distortion or when connecting to a speaker level output.
4. GROUND LIFT – When the switch is engaged, the input ground (shield) is disconnected.
5. BALANCED OUTPUT – Male XLR low-Z connector.