De10 headset – Samson AH9 Wireless Transmitter with Fitness Headset Microphone (D: 542 to 566 MHz) User Manual
Page 10
10
DE10 Headset
Mic Positioning
Fitting the DE10 Headset
Position the DE10 microphone element about
0.25” – 1” behind the corner of your mouth.
Since the DE10 is an omnidirectional capsule,
the end of the microphone does not need to
be facing your mouth. To avoid breadth noise
and p-pops, do not place the microphone
directly in front of your mouth.
If the microphone is too far away from your
mouth you will need to increase the gain and
reduce isolation.
To minimize additional noise, do not locate
the microphone tight against your cheek.
The DE10 headset can be sized by sliding the
ear hooks to fit snug around your head. If the
DE10 is loose and will not stay in place, slide
the ear hook wires back for a tighter fit.
Adjust the microphone position by holding
the left ear hook wire and slide the boom
forward or back. For optimum performance
the microphone should be close to the
skin and towards the corner of the mouth,
approximately a half inch away.
Position the moisture guard ring as close to
the capsule as possible.
For outdoor use and to help reduce
p-popping, use the included windscreens.