Sony a7R V Mirrorless Camera - Manual (Page 32)

32 US
Specifications
Amplifier section
U.S. models:
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R:
With 8 ohms loads, both channels
driven, from 100 - 5,000 Hz; rated
20 W per channel minimum RMS
power, with no more than 1% total
harmonic distortion from 250 mW to
rated output.
POWER OUTPUT (reference)
Front L/R woofer blocks: 30 W (per
channel at 8 ohms, 1 kHz)
Front L/R tweeter blocks: 30 W (per
channel at 8 ohms, 10 kHz)
Canadian models:
POWER OUTPUT (rated)
Front woofer L + Front woofer R: 22 W
+ 22 W (at 8 ohms, 1 kHz, 1% THD)
Front tweeter L + Front tweeter R: 22 W
+ 22 W (at 8 ohms, 10 kHz, 1% THD)
POWER OUTPUT (reference)
Front L/R woofer blocks: 30 W (per
channel at 8 ohms, 1 kHz)
Front L/R tweeter blocks: 30 W (per
channel at 8 ohms, 10 kHz)
Audio Inputs
TV IN (OPTICAL)
USB
HDMI OUT (TV (ARC))
TV Display Output (USB display)
HDMI OUT (TV (ARC))
USB section
(USB) port:
Type A (For connecting USB memory)
BLUETOOTH section
Communication system
BLUETOOTH Specification version 4.2
Output
BLUETOOTH Specification Power
Class 1
Maximum communication range
Line of sight approx. 10 m 1)
Frequency band
2.4 GHz band (2.4000 GHz -
2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles 2)
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote Control
Profile)
Supported Codec 3)
SBC 4)
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency
32 kHz, 44.1 kHz, 48 kHz)
1)
The actual range will vary depending on
factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
cordless phone use, reception
sensitivity, the operating system,
software applications, etc.
2)
BLUETOOTH standard profiles indicate
the purpose of BLUETOOTH
communication between devices.
3)
Codec: Audio signal compression and
conversion format
4)
Abbreviation for Subband Codec
Front L/Front R speaker block section
Speaker system
2-way speaker system, Bass reflex
Speaker
Woofer: 48 mm × 90 mm
(1 7/9 in × 3 5/9 in) cone type
Tweeter: 25 mm (1 in) balanced dome
type
General
Power requirements
120 V AC, 60 Hz
Power consumption
On: 30 W
Standby mode: 0.5 W or less (Power
Saving mode)
(When Control for HDMI function and
Additional Information