Extreme Networks 200 Series - Manual (Page 288)

286 Summit 200 Series Switch Installation and User Guide
Using ExtremeWare Vista on the Summit 200
Figure 78: Ethernet Port Errors
Port Utilization
This window shows port utilization. As shown in Figure 79, the report fields are as follows:
Port Number
Speed —Configured port speed, either 10, 100, 1000, or auto
Link Status —Either active (A) or ready (R)
Rx Pkt/Sec —Received packets rate
Peak Rx Pkt/Sec—Peak received packet rate
Tx Pkt/Sec —Transmission packet rate
Peak Tx Pkt/Sec —Peak packet rate transmitted
Rx Byte/Sec —Received byte rate
Peak Rx Byte/Sec —Peak received bytes rate
Tx Byte/Sec —Transmission byte rate
Peak Tx Byte/Sec —Peak transmission byte rate
Bandwidth —Bandwidth utilization
Peak Bandwidth —Peak bandwidth utilization