Location and function of parts – Sony SRX-T110 4K SXRD 11,000-Lumen Projector (No Lens or Lamps) User Manual
Page 18
18
Loc
atio
n
and F
unc
tion
of
P
ar
ts
Location and Function of Parts
Location and Function of
Parts
a
DC power output cord
Supplies DC power when the Mode select switch is set to DC OUT.
Do not connect a device with power requirements higher than the
specified values.
b
Charge connectors
Supplies power for charging a lithium-ion battery pack.
The charging current is automatically blocked when a battery pack
other than a lithium-ion battery pack has been mistakenly attached.
c
AC input connector
Connects to an AC power source via the AC power cord.
d
CHARGE indicator
Shows the charging status of the attached battery pack during
charging of a battery pack with the Mode select switch set to
CHARGE.
For details, see “Charging a Battery Pack” on page 19.
e
Mode select switch
CHARGE:
For charging a lithium-ion battery pack
DC OUT:
For supplying DC power
f
DC OUT indicator
Lights in green when the Mode select switch is set to DC OUT and
DC power is being supplied.
If some trouble is detected, the indicator goes dark.
Note
DC OUT
CHARGE
a
b
c
d
e
f