Using the remote unit, Instruction manual – StarTech.com USB VGA KVM Console Extender over CAT5 UTP User Manual
Page 14
Instruction Manual
11
Using the Remote Unit
The
Remote
Unit allows a user at the
Remote
Unit to assume control of
devices connected to the
Host
Unit, if the
Host
Unit is set to
Auto
or
Re-
mote
mode, and it also permits the user seated at the
Remote
Unit to use
any connected system as though the KVM Extender was transparent.
You can use either keyboard shortcuts or the mode switch on the top of
the
Host
Unit to alternate control between A and B. Unlike the
Host
Unit,
however, the switch on top of the Remote unit only offers two selectable
modes:
LED Indicators
Keyboard Shortcut Command Sequences
Mode
A
Indicator
B
Indicator
Remote Access (Computer A)
On (solid)
Off
Local Access (Computer B)
Off
On (solid)
Standard Command
With Compatibility Mode
Enabled
Description
[Ctrl] - [Ctrl] - [T]
[Ctrl] - [Ctrl] - [T]
Toggles console control
between Computer A
and Computer B
[Ctrl] - [Ctrl] - [Esc]
[Ctrl] - [Ctrl] - [Esc]
Cancels the hotkey
sequence
[Ctrl] - [Ctrl] - [Alt]+[E]
[Ctrl] - [Ctrl] - [Alt]+[E]
Enables (2 beeps) or
disables (1 beep) Com-
patibility Mode so that
the KVM extender will
work with a KVM switch
that also uses a [Ctrl]
hotkey sequence
Local
Remote