Command list – StarTech.com 4x4 HDMI Matrix Switcher with Audio and Ethernet Control (4K60) User Manual

Page 35

Advertising
background image

34

To view manuals, videos, drivers, downloads, technical drawings, and more visit www.startech.com/support

Command List

The following is a list of commands that you can use through a

computer’s command line to control

Matrix Switch

functions:

Notes:

All commands must be followed by pressing the

Enter

button in order to execute the command.

Commands are not case-sensitive.

Commands also work with RS232 (serial).

Command

Description

A N

Switch Output A to Input N (N = 1 - 4)

B N

Switch Output B to Input N (N = 1 - 4)

C N

Switch Output C to Input N (N = 1 - 4)

D N

Switch Output D to Input N (N = 1 - 4)

I N

Switch all Outputs to Input N (N = 1 - 4)

AB....N

Switch outputs AB to Input N (N = 1 - 4)

SETIP xxxx.

xxxx.xxxx

Setting IP, Subnet, Gateway, for a Static IP (x =

0 - 255)

IPCONFIG

Displays the current IP Configuration

RSTIP

Sets the IP configuration to DHCP mode

P0

Powers the Switch Off

P1

Powers the Switch On

Advertising