SPYPOINT LINK-MICRO-LTE-V Cellular Trail Camera (Verizon Data Plan) - Manual (Page 4)

ENGLISH
4
SELECT A POWER SOURCE
• Lithium or alkaline AA batteries
• 12V rechargeable battery (#KIT-12V)
• 3.7V rechargeable battery pack (#LIT-10)
FOR BEST RESULTS AND NO LEAKAGE:
• Use only new lithium or alkaline batteries.
• Do not mix old and new batteries.
• Do not use rechargeable AA batteries
(their lower voltage can generate operational issues).
HOW TO INSTALL AA BATTERIES PROPERLY
• Unlock and open the LINK-MICRO-LTE door.
• Take the battery holder out.
• Insert the AA batteries into the battery holder
following polarity (+) and (-) indications.
• Place the battery holder back into the battery compartment.
FORMATTING YOUR M
icro
SD CARD
Before inserting the MicroSD card into your camera, it must be
reformatted via a computer to ensure proper functionality.
Memory card is sold separately. Whether you choose to use a MicroSD
card you previously used in another device or a brand new one you've
just bought, its capacity must not exceed 32 GB and it must be
reformatted. Do no use the "Quick format" option.
INSERTING A M
icro
SD CARD
• Ensure the camera is turned off.
• Insert a MicroSD memory card (up to 32 GB capacity)
into the MicroSD card slot with the label facing up.
• The card is inserted correctly when a click is heard.
Getting started
NOTE: We recommend using the SPYPOINT #LIT-10
rechargeable lithium battery pack, sold separately.