LG evo M Series M3 77" Wireless 4K HDR Smart OLED TV - Manual (Page 10)

10
Wireless signal receiver & Power button
This area has an antenna that receives the video transmitted from the
antenna of the Zero Connect Box.
If there are any obstacles around this area, the screen may be disconnected or
not displayed due to interference.
The power button is used to turn the TV Screen on or switch to the standby
state, or pair it with the Zero Connect Box.
Sliding button
This button adjusts the antenna transmission direction of the Zero
Connect Box up and down . If adjusted towards the top LED ( ), the
antenna transmission direction is downward (0˚). If adjusted in the opposite
direction of the top LED, the antenna transmission direction is upward (50˚).
If adjusted to the center, the antenna transmission direction is at 25˚.
Dial
This disc adjusts the antenna transmission direction of the Zero
Connect Box left and right . The dial can be rotated 90˚ left or right from
the front of the Zero Connect Box.
Top LED
This LED is located in front of the sliding button and indicates the wireless
signal strength with different colors . The colors include blue (good),
green (moderate), yellow (weak), and red (disconnected).
Wireless signal transmitter
This area has an antenna that transmits video and audio from the
Zero Connect Box to the TV Screen. The antenna transmission direction
is adjusted using the dial and sliding button. If there is an obstacle in front
of the antenna, the screen may disconnect or display incorrectly due to
interference.
Voice recognition unit
This area recognizes your voice and is located on the lower left and right sides
of the front of the Zero Connect Box.
When giving a voice command,
speak from the front of the Zero Connect
Box . If the area with the voice recognition parts is blocked or if you speak
from the side or back, voice recognition may function poorly or not work at
all.
Front LED
This LED is located at the bottom center of the front of the Zero Connect Box
and
indicates the power or operation status .
External connection terminal
You can connect the Zero Connect Box's power cord and external video/audio
devices such as external antennas and set-top boxes.
Pairing button
This button is used to re-pair the TV Screen and Zero Connect Box if they have
been unpaired. For pairing instructions, please refer to "Re-pairing" on the
right.
Note
• The wireless TV consists of the TV Screen and Zero Connect Box.
• The Zero Connect Box transmits video and audio wirelessly to the TV
Screen.
• The Zero Connect Box has external connection terminals.
• You can connect video and audio signals (external antenna, set-top box)
to the external connection terminals on the back of the Zero Connect
Box.
• The wireless signal receiver is on the bottom center of the TV
Screen. It is next to the TV Screen power button.
• The voice recognition unit is on the lower left and right sides of the front
of the Zero Connect Box. Ensure there is no dust or foreign matter in the
small hole.
• The front LED is on the bottom of the front of the Zero Connect Box.
• The Zero Connect Box has wireless connection control terminals.
• The wireless connection control terminals consist of a dial and
a sliding button.
• The dial and wireless signal transmitter of the Zero Connect Box
move together.
• You can adjust the Zero Connect Box’s wireless signal transmitter up and
down using the sliding button.
• The signal strength LED for checking the wireless connection status is in
front of the sliding button on the top.
• The colors indicating signal strength are blue (good), green
(moderate), yellow (weak), and red (disconnected).
• The Zero Connect Box has a pairing button.
• There is a button for pairing on the TV Screen as well, which can also be
used as the power button.
• The TV Screen and the Zero Connect Box are paired one to one and are
already paired when provided.
Re-pairing
1 If the screen is not displayed due to the TV Screen and Zero Connect Box
being disconnected, they need to re-paired. If you press and hold the
pairing button on the back of the Zero Connect Box for 5 seconds, the top
LED flashes white.
2 If you press and hold the power button on the TV Screen for 5 seconds, the
standby indicator of the screen’s power unit flashes white. The TV Screen
and Zero Connect Box are now paired, and the LED on the top of the Zero
Connect Box changes to the color corresponding to the signal strength.
* If video is not displayed and the pairing screen remains, contact customer
service.
* If pairing is not resumed within one minute, it will be cancelled and must
be initiated again.