Epson DC-07 Document Camera - Manual (Page 30)

The following table describes the safety symbols displayed on the product.
No. Symbol Supported
Standard
Explanation
A IEC60417
No.5007 Power ON
Indicates connection to power supply.
B IEC60417
No.5008 Power OFF
Indicates disconnection from power
supply.
C IEC60417
No.5009 Standing by
Indicates electricity is being supplied to
part of the device/equipment when the
switch or position of the device/
equipment is in standby status.
D ISO7000
No.0434B
IEC3864-B3.1 Caution
Indicates caution must be taken when
handling the product.
E IEC60417
No.5041 Caution (Hot)
Indicates parts of the product that should
not be touched accidentally due to high
temperatures.
F IEC60417
No.6042
ISO3864-B3.6 Caution (Danger of Electric Shock)
Indicates that the device/equipment
presents a risk of electric shock.
G IEC60417
No.5957 Indoor Use Only
Indicates that the device/equipment is for
indoor use only.
H IEC60417
No.5926 Power Connector Polarity
Indicates the positive and negative
electrodes for DC power devices that can
be connected.
I IEC60417
No.5001B Batteries (General)
Indicates that batteries are used to power
the device/equipment. Displayed on the
battery case cover or connection port.
No. Symbol Supported
Standard
Explanation
J IEC60417
No.5002 Battery Direction
Indicates the direction of the batteries on
the outside or inside of the battery case.
K IEC60417
No.5019 Protective Grounding
Indicates an external conductor to
safeguard against electric shocks if a
malfunction occurs by using a connection
port or grounding safeguard port.
L IEC60417
No.5017 Grounding
Indicates a grounding port when No. 11 is
not explicitly called for.
M IEC60417
No.5032 AC Current
Indicates the device/equipment uses a
dedicated AC current, and has an AC
current supported port.
N IEC60417
No.5031 Direct Current
Indicates the device/equipment uses a
dedicated DC current, and has a DC
current supported port.
O IEC60417
No.5172 Class II Equipment
Indicates the device/equipment meets the
JIS C 9335-1/JIS C 8105-1 safety
requirements for Class II equipment.
P ISO 3864 General Prohibition
Indicates unidentified general prohibited
items.
Q ISO 3864 Do Not Touch
Indicates that touching specific parts of
the equipment is prohibited since an
injury could occur.
R --- Indicates that you should not look into the
projector's lens while it is projecting.
Symbols Indicating the Device Meets the IEC60950-1 A2 Safety Standards
30