Epson WorkForce ST-M3000 Monochrome MFP Supertank Printer User Manual
Page 277
277
5.
Select
Print Head Nozzle Check
.
6.
Select
.
The nozzle check pattern is printed.
7.
Do one of the following, depending on the results of the product check:
• If the page prints and the nozzle check pattern is complete, the product is operating properly. Any
operation problem you may have could be caused by your computer, cable, software, or selected
settings. Check the other solutions in this book or try uninstalling and reinstalling your printer
software.
• If the page prints but the nozzle check pattern has gaps, clean or align the print head.
• If the page does not print, the product may have a problem. Check the other solutions in this
manual. If they do not work, contact Epson.
Parent topic:
Related concepts
Print Head Alignment
Print Head Cleaning
Uninstall Your Product Software
Related references