Epson Expression Premium XP-6100 All-in-One Printer - Manual

Start Here
Note: As part of setup, your product’s serial number will be
sent to a secure Epson server so that you can be eligible to
participate in programs we may offer from time to time, including
the Epson ink replenishment program. You will have a separate
opportunity to consent to participating in such programs.
8
Follow the on-screen instructions to adjust the print
quality of your product.
Note:
• You need to load paper before you can adjust the print quality.
See “Load paper” below for details.
• Select Adjust Later if you want to adjust the print quality later.
For more information, see the online User’s Guide.
4 Load paper
See the instructions below to load paper.
Output tray
Cassette 1
Cassette 2/
front cover
You can load the following paper sizes:
• Cassette 1: 3.5 Ч 5-, 4 Ч 6-, or 5 × 7-inch photo paper
• Cassette 2: Letter-, A4-, legal-size, or 8 × 10-inch paper
See the online User’s Guide for information about available
paper types and sizes, loading capacities, and printing on
CD/DVD/Blu-ray
® discs.
1
Lower the front cover.
2
Pull out a paper cassette.
Cassette 1 Cassette 2
3
Slide the side edge guides outward.
Cassette 1 Cassette 2
IMPORTANT: Before using this product, make sure you read
these instructions and the safety instructions in the online
User’s Guide.
Note: This printer is designed for use with Epson ® cartridges only, not
third-party cartridges or ink. For important ink information, visit
www.epson.com/epsonink (U.S.) or www.epson.ca/epsonink (Canada)
or see your printer box.
1 Unpack
Protective paper
Note:
• Do not open ink cartridge packages until you are ready to install the
ink. Cartridges are vacuum packed to maintain reliability.
• Do not throw away the protective paper located inside the ink
cartridge holder. Tape this piece to the top of the ink cartridge
holder when transporting your product. For more information, see
the online User’s Guide.
• The CD/DVD tray is stored underneath cassette 2.
1
Remove all protective materials from the product.
2
Lift up the scanner unit. Remove all protective materials
from inside the product.
3
Lower the scanner unit.
2 Turn on and configure
1
Connect the power cord to the back of the printer and to
an electrical outlet.
Caution: Do not connect to your computer yet.
2
Turn on the product, then adjust the control panel.
3
Select your language.
Note:
• You can change this setting later using the product’s control
panel. For more information, see the online User’s Guide.
• If an error message appears, turn off the product and check
that no protective material has been left inside the product.
3 Install ink cartridges
Caution: Keep the ink cartridges out the reach of children and do not
drink the ink.
Note: The included initial cartridges are designed for reliable printer
setup and cannot be used as replacement cartridges or resold. After
setup, the remaining ink is available for printing.
1
Lift up the scanner unit.
Caution: Do not touch the flat white cable or the print head
path.
2
Gently shake the Black (BK) ink cartridge.
Note: Do not shake the Photo Black (PB) or other ink cartridges.
3
Unpack the ink cartridges.
Caution: Do not touch the areas shown below. Doing so may
prevent normal operation and printing.
4
Remove the cap from each ink cartridge.
Note: Save the caps and use them to recap the ink cartridges
after removing them for storage or disposal.
5
Insert the cartridges at an angle in the holder for each
color. Press each cartridge down until it clicks.
6
Lower the scanner unit.
7
Select Installed and press the OK button to start charging
the ink. Ink charging takes approximately 10 minutes.
When you see a completion message on the printer’s LCD
screen, charging is complete.
Caution: Don’t turn off the printer or raise the scanner unit while
the printer is charging or you’ll waste ink.
XP-6100 Small-in-One
®
Printer