Epson PowerLite L265F 4600-Lumen Full HD Laser 3LCD Projector (Black) User Manual
Page 49
49
8.
Select
IP Settings
and press
Enter
.
9.
Select your IP settings as necessary:
• If your network assigns addresses automatically, turn on the
DHCP
setting.
• If you must set addresses manually, turn off
DHCP
and enter the projector's
IP Address
,
Subnet
Mask
, and
Gateway Address
as needed.
Note:
To highlight the numbers you want from the displayed keyboard, press the arrow buttons on
the control panel or remote control. To select a highlighted number, press
Enter
. Alternatively,
press and hold the
Num
button on the remote control while entering the desired numbers.
10. To prevent display of the IP address on the standby screen, turn off
IP Address Display
in the
Wired LAN menu.
11. Select
Return
and press
Enter
to return to the Network Settings menu.
12. Select
Network Projection
and press
Enter
.
You see a screen like this: