Using electrical power, Product servicing – Acer PE320QK bmiipruzx 31.5" 16:9 Color Accurate HDR 4K UHD Monitor User Manual

Page 4

Advertising
background image

and to protect it from overheating. These openings must not be blocked or covered. The

openings should never be blocked by placing the product on a bed, sofa, rug or other

similar surface. This product should never be placed near or over a radiator or heat

register, or in a built-in installation unless proper ventilation is provided.

Never push objects of any kind into this product through cabinet slots as they may touch

dangerous voltage points or short-out parts that could result in a fire or electric shock.

Never spill liquid of any kind onto or into the product.

To avoid dmage of internal components and to prevent battery leakage, do not place the

product on a vibrating surface.

Never use it under sporting, exercising, or any vibrating environment which will probably

cause unexpected short current or damage internal devices.

Using electrical power

This product should be operated from the type of power indicated on the marking label.

If you are not sure of the type of power available, consult your dealer or local power

company.

Do not allow anything to rest on the power cord. Do not locate this product where people

will walk on the cord.

If an extension cord is used with this product, make sure that the total ampere rating of the

equipment plugged into the extension cord does not exceed the extension cord ampere

rating. Also, make sure that the total rating of all products plugged into the wall outlet does

not exceed the fuse rating.

Do not overload a power outlet, strip or receptacle by plugging in too many devices. The

overall system load must not exceed 80% of the branch circuit rating. If power strips are

used, the load should not exceed 80% of the power strip’s input rating.

This product’s power cord is equipped with a three-wire grounded plug. The plug only

fits in a grounded power outlet. Make sure the power outlet is properly grounded before

inserting the power cord plug. Do not insert the plug into a non-grounded power outlet.

Contact your electrician for details.

Warning!

The grounding pin is a safety feature. Using a power outlet that is not properly

grounded may result in electric shock and/or injury.

Note:

The grounding pin also provides good protection from unexpected noise produced

by other nearby electrical devices that may interfere with the performance of this

product.

Use the product only with the supplied power supply cord set. If you need to replace the

power cord set, make sure that the new power cord meets the following requirements:

detachable type, UL listed/CSA certified, type SPT-2, rated 7 A 125 V minimum, VDE

approved or its equivalent, 4.6 meters (15 feet) maximum length.

Product servicing

Do not attempt to service this product yourself, as opening or removing covers may

expose you to dangerous voltage points or other risks. Refer all servicing to qualified

service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service

personnel when:

the power cord or plug is damaged, cut or frayed

Advertising