Asus VT168HR 15.6" Multi-Touch Monitor - Manual (Page 24)

4-5
Chapter 4: General Instruction
4. Image
You can adjust the image Sharpness, Trace Free, Aspect Control,
VividPixel, ASCR, Position, Focus and Auto Adjust from this main
function.
Image
Sharpness
Aspect Control
VividPixel
ASCR
Focus
Auto Adjust
Position
Standard Mode VGA 1366x768@60Hz
ASUS VT168
S
Trace Free
• Sharpness : Adjust the picture sharpness. The adjusting range
is from 0 to 100. (Only disable for selecting “Standard Mode” and
“sRGB Mode” in Splendid menu.)
• Trace Free: Speeds up the response time by Over Drive
technology. The adjusting range is from lower 0 to faster 100.
• Aspect Control : Adjust the aspect ratio to “Full”, “4:3”.
• VividPixel : ASUS Exclusive Technology that brings lifelike
visuals for crystal-clear and detail-oriented enjoyment. The
adjusting range is from 0 to 100.
• ASCR : Select ON or OFF to enable or disable dynamic contrast
ratio function. (ASCR: ASUS Smart Contrast Ratio. Disabled at
“Standard Mode”, “sRGB Mode” and “Reading Mode.)
• Position : Adjust the horizontal postition (H-Position) and the
vertical position (V-Position) of the image. The adjusting range is
from 0 to 100. (Only available for VGA input.)
• Focus : Reduce Horizonal-line noise and Vertical-line noise of
the image by adjusting (Phase) and (Clock) separately. The
adjusting range is from 0 to 100. (Only available for VGA input.)
• Auto Adjust : Automatically adjust the image to its optimized
position, clock, and phase. (Only available for VGA input.)
4:3 is only available when input source is in 4:3 format.