Asus Republic of Gamers Strix XG259QN 24.5" HDR 380 Hz Gaming Monitor - Manual (Page 20)

3-2 Chapter 3: General Instructions
3.1.2 OSD function introduction
1. Gaming
Volume 50 Back Enter Exit
Gaming
Image
Color
Input Select
MyFavorite
DisplayPort OFF
GameVisual
Racing Mode
Input Select HDR
380Hz 1920x1080
ROG STRIX XG259QN
Overclocking
Variable OD
Variable Refresh Rate
ELMB/ELMB SYNC
GamePlus
GameVisual
Shadow Boost
10
• Overclocking :
* ON : This function allows you to adjust the refresh rate.
* Max Refresh Rate : Allows you to select a maximum refresh rate of 380Hz
(Only for DisplayPort input). After selecting, press the ( ) button to
activate the setting.
Overclocking may cause screen flickering. To reduce such effects, disconnect
the DisplayPort cable and use the monitor OSD menu to try again with a safer
Max. Refresh rate.
• Variable OD : Improves the gray level response time of the LCD panel.
• Variable Refresh Rate: Allows an Variable Refresh Rate supported* graphics
source to dynamically adjust display refresh rate based on typical content frame
rates for power efficient, virtually stutter free and low-latency display update.
• Aspect Control is not available when this function is activated.
• * Variable Refresh Rate can only be activated within 48Hz~240Hz for
HDMI, 60Hz~380Hz for DisplayPort.
• This function is only available when DisplayPort Stream is DisplayPort
1.2 or DisplayPort 1.4 .
• *For supported GPUs, minimum PC system and driver requirements,
please contact the GPU manufactures.
• ELMB/ELMB SYNC : ELMB can only be activated when Variable Refresh Rate
is Off and the refresh rate is 120Hz, 144Hz, 240Hz, 360Hz (DisplayPort only) or
380Hz (DisplayPort only). ELMB SYNC can be activated when Variable Refresh
Rate is On . This function eliminates screen tearing, reduces ghosting and motion
blur when playing games.
ELMB SYNC can only be activated when the refresh rate is greater than (and
not equal to) 60Hz for DisplayPort.