Lenovo G27-30 27" 165 Hz HDR Monitor - Manual (Page 16)

Chapter 2. 2-4
Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
G27-30
Game Mode
Refresh Rate
MPRT
Over Drive
FreeSync Premium
Standard
Off
Off
Level 3
Auto
Input : HDMI 1 Resolution : 1920*1080 Refresh Rate : 60Hz
Game
Screen Settings
Color Settings
Input Source
OSD Settings
Information
To use the controls:
1. Press to open the main OSD menu.
2. Use or to move among the icons. Select an icon and press to access that function. If
there is a sub-menu, you can move between options using or , then press to select
that function. Use or to make adjustments. Press to save.
3. Press to move backwards through the sub-menus and exit from the OSD.
4. Press and hold for 10 seconds to lock the OSD. This will prevent accidental adjustments
to the OSD. Press and hold for 10 seconds to unlock the OSD and allow adjustments to
the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold for 10 seconds to disable
/ enable DDC/CI function. The words “DDC/CI disable” shows on the screen.
G27-30
Language
OSD Timeout
DP Select
Reset All Settings
On
Input : HDMI 1 Resolution : 1920*1080 Refresh Rate : 60Hz
Game
Screen Settings
Color Settings
Input Source
OSD Settings
Information Menu Horizontal
CEC
Off
HDMI CEC Allows you to On or Off HDMI CEC function,And only HDMI1 port is
supported.
Switch DC on/off and sleep function can be realized synchronously through Monitor or
Source (DVD/PS4/PS5/Xbox)