Lenovo ThinkVision T22i-20 21.5" 16:9 IPS Monitor User Manual

Page 11

Advertising
background image

1-6 T22i-20 Flat Panel Monitor User’s Guide

7.

Connect one end of the USB cable to the USB downstream terminal of the monitor, and connect the

other end of the USB cable to an appropriate USB port on your device.

Note:

The USB Battery Charging Specification 1.2 output 5Vdc/1.5A(typical), 2A (max) and the

other three standard USB Output 5Vdc/900mA.The USB downstream port does not provide power

while the monitor is switched off.

8.

Plug the monitor power cord and the computer cord into grounded electrical outlets.

Note:

A certified power supply cord has to be used with this equipment. The relevant national

installation and/or equipment regulations shall be considered. A certified power supply cord not

lighter than ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation

H05VV-F 3G 0.75mm² or H05VVH2-F2 3G 0.75mm²) shall be used. Alternative a flexible cord be

of synthetic rubber according to IEC 60245 (designation H05RR-F 3G 0.75mm²) shall be used.

9.

Assembled cables with Line Cleaner as shown below.


If there are any * tag, you can consult the comments on page 1-1.

Advertising