Using the on-screen display (osd) controls, Using the on-screen display (osd) controls -4, T27q-20 – Lenovo ThinkVision T32h-20 31.5" 16:9 QHD IPS Monitor User Manual
Page 17
Chapter 2.
2
-
4
Using the On-Screen Display (OSD) controls
To adjust the settings, the user controls can be viewed through the OSD.
Input Signal:
HDMI
Resolution:
2560 x 1440
75
Contrast
Color Mode:
Reddish
T27q-20
Advanced Settings
Port Settings
Menu Settings
Exit
Monitor Controls
Brightness
75
Refresh Rate:
60Hz
To use the controls:
1. Press
to open the main OSD menu.
2. Use or
to move among the icons. Select an icon and press
to access that function. If
there is a sub-menu, you can move between options using
or
, then press
to select
that function. Use or
to make adjustments. Press
to save.
3. Press
to move backwards through the sub-menus and exit from the OSD.
4. Press and hold
for 10 seconds to lock the OSD. This will prevent accidental adjustments
to the OSD. Press and hold
for 10 seconds to unlock the OSD and allow adjustments to
the OSD.
5. Enables DDC/CI by default. Use OSD Exit Key, Press and hold
for 10 seconds to
disable / enable DDC/CI function. The words “DDC/CI disable” shows on the screen.