Lenovo ThinkVision T27h-2L 27" 16:9 QHD IPS Monitor - Manual (Page 16)

Chapter 2. 2 - 3
Adjusting your monitor image
This section describes the control features to adjust your monitor image.
Using the direct access controls
The direct access controls can be used when the On Screen Display (OSD) is not displayed.
Table 2-1 . Direct access controls
Icon Control Description
1
Exit Exit from menu and return before menu
DDC-CI
Press and hold for 10 seconds to enable or
disable the DDC-CI function
2
Input Change Switches the video input source
Increase For increasing the value on adjustment bar
Up Up key function and up circle
3
Brightness Direct access to Brightness adjustment
Decrease For decreasing the value on adjustment bar
Down Down key function and down circle
4
Menu
To access OSD menu
Press to confirm selection
Press and hold for 10 seconds will lock menu/
unlock menu
Enter
Press to enter next level on main menu/
sub menu status or enter previous level on
adjustment bar
Note: The T27h-2L uses Natural Low Blue Light Technology that reduces harmful blue light to
protect human eyes while maintaining picture quality in 6500K color temperature.
If you can’t make sure the monitor already under Low Blue Light mode,
Just do
Reset action in the OSD item Menu Settings Factory Reset .