Lenovo ThinkVision 21.5" Monitor - Manual (Page 30)

Chapter 3. 3-5
Manually installing the monitor driver
Steps of manually installing the monitor driver in Microsoft Windows 7 and Windows 10 are
Installing the monitor driver in Windows 7
To use the Plug and Play feature in Microsoft Windows 7, do the following:
1. Turn off the computer, all attached devices.
2. Ensure that the monitor is connected correctly.
3. Turn on the monitor and then the system unit. Allow your computer to start the Windows
7 operating system.
4.
corresponding monitor driver and download it to a PC to which this monitor is connected
(such as a desktop).
5. Open the Display Properties window by clicking Start , Control Panel , Hardware and
Sound icon, and then click the Display icon.
6. Click the Change the display settings tab.
7. Click the Advanced Settings icon.
8. Click the Monitor tab.
9. Click the Properties button.
10. Click the Driver tab.
11. Click Update Driver , then click .
12. Select Pick from the list of device driver program on the computer .
13. Click the Hard Disk button. By clicking the Browse button, browse and point to the
following path:
X:\Monitor Drivers\Windows 7
(where X indicates "the folder in which the downloaded driver is located" (such as a
desktop)).
14. Select the " lenE22-28.inf Open button. Click the OK button.
15. In the new window, select lenE22-28 and click Next .
16.
17. Restart the system. The system will automatically select the maximum refresh rate and
Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.
Lenovo recommends using either 1920 x 1080 at a refresh rate of 60 Hz, or 640 x 480 at a
refresh rate of 60 Hz.
From the Lenovo website http://support.lenovo.com/docs/E22_28,find the
as follows: